Waterite Vectamaxx RSL 4800 gpd Reverse Osmosis System
GENERAL SPECIFICATIONS
✔️ TYPE: Extra Low pressure RO, spiral wound
membrane(s) in series, recirculation loop
✔️ VOLTAGE: 230VAC/60hz (other voltages available on
request)
✔️ SERVICE AMPS: 230VAC
✔️ RSL4800 6.4
✔️ FEED WATER PRESSURE: 40 psi minimum, 65 psi maximum
✔️ FEED WATER TEMP: 35º C maximum
MATERIAL SPECIFICATIONS:
✔️ FRAME COLOUR: White powder coat
✔️ FRAME MATERIAL: Mild steel square tubular, c/w leveling feet
✔️ FRAME DIMENSIONS:
✔️ Height 50″ (127cm)
✔️ Width 31″ (79cm)
✔️ Depth 24.0″ (62cm)
✔️ OPERATING PRESSURE: 130 psi (9.1 bar)
✔️ MEMBRANE: BLACK MAX®, spiral wound TFC, BME-
4040SXL, 2400 USGPD permeate @ 500 mg/l
NaCl, 100 psi, 25ºC feed
✔️ UNIT DRY WEIGHT: RSL4800: 145 lbs. (65.7 kg)
✔️ INLET SOLENOID: 220VAC/60hz, normally closed, ¾” FNPT, 0
differential, brass
✔️ LOW PRESSURE SWITCH: 220VAC/60Hz cut-out @ 15 psi
✔️ DRIVE PUMP MOTOR: 230VAC/60hz, type 56J frame, 3450 RPM,
threaded shaft, ball bearing
✔️ DRIVE PUMP: Multi-stage 416SS, stainless discharge,
housing and bracket, Noryl impellers and
stages, SS bearings, wear rings, couplings and
pump shaft.
✔️ RSL4800: 10 USGPM @ 110 psi
(Based on 0 psi inlet pressure)
✔️ CONCENTRATE VALVE: Brass needle valve, internally bypassed, metal
seated, o-ring packing
✔️ RECIRCULATION VALVE: Brass needle valve, metal seated, o-ring
packing
✔️ SYSTEM FITTINGS: Schedule 40 PVC
✔️ LOW PRESSURE FITTINGS: Jaco standard pressure compression or DMT
push-on
✔️ LOW PRESSURE TUBING: Higher pressure 1/2” LDPE, clear
PRE-FILTRATION HOUSING: 1 X Polypropylene, 20”, 125 psi rated, o-ring
seated with threaded cap, pressure release, 1”
inlet/outlet, full flow, 20 USGPM maximum
✔️ FILTER CARTRIDGE: Polypropylene, 5-micron
✔️ SPEC RO-SYS-002R5
✔️ MEMBRANE HOUSING: 304 SS body, polyethylene caps, band clamp
closure, ¾” FNPT concentrate ports, ½”
permeate port, 300 psi rating (optional)
✔️ PRESSURE GAUGES: Glycerin filled, stainless body, 2 1/2’’. 0-100
psi pre-filter pressure pre/post, 0-200 psi
system pressure
✔️ FLOW METERS: Acrylic panel mounted, 0.5-5.0 USGPM or 1.0 –
10.0 USGPM, dependent on model
✔️ HIGH PRESSURE RELIEF VALVE:
Watts model 3L, bronze body, set at 150 psi
✔️ PERFORMANCE SPECIFICATIONS
✔️ PERMEATE PRODUCTION
✔️ RSL4800 3.2 USGPM (12.0 LPM)
Calculated production rate @ feed water of 500 mg/l NaCl, 25ºC, average
system pressure @ 130psi, 60 % recovery, inlet pressure of 50 psi.
✔️ WASTE PRODUCTION RATE:
Recovery Rate @ 60%
Feed Water <1000 TDS RSL4800 2.12 USGPM (8.0 LPM
Recovery Rate @ 40%
Feed Water >1000 TDS RSL4800 4.8 USGPM (18.0 LPM)
RSL7200 7.2 USGPM (27.0 LPM)
✔️MEMBRANE CR OSSFLOW: RSL4800: (1) 15.1 USGPM (57LPM)
in series order. Pressure drop (2) 13.5 USGPM (51.1 LPM)
15 psi per element.
SPEC RO-SYS-002R5
RECOMMENDED FEED WATER PRETREATMENT SPECIFICATIONS:
✔️ TDS: < 2000 TDS
✔️ HARDNESS: < 6 gpg (103 mg/l)
✔️ TOTAL IRON: < .05 ppm
✔️ TANNIN: < .5 ppm
✔️ CHLORINE: < .1 ppm
✔️ pH: 5.5 – 9.5
✔️ ORGANIC/MICROBIOLOGICAL ACTIVITY: 0
✔️ MANGANESE: <.05 ppm
✔️ HYDROGEN SULPHIDE: 0
✔️ TURBIDITY: SDI < 5.0
✔️ E. FEED WATER REQUIREMENTS:
✔️ RSL4800: 8.8 USGPM minimum includes 10% safety factor
OPTIONAL EQUIPMENT
12vdc Control for pre-filter backwash cut out contact
All materials and components used to fabricate RSL Series systems meet
or exceed requirements specified by NSF Standard 61
R/O RSL4800
Please note: These systems are built to order so allow 6-8 weeks for delivery. Also since these are built to order, all sales are final.
Prompt shipping and expert packing
We offer a broad range of shipping options thanks to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse staff will package every item to our exacting specifications. Your goods are thoroughly checked and properly secured before shipping. We deliver to thousands of customers every day in a variety of countries. This shows our commitment to becoming the largest online retailer on the planet. The warehouses are located located in Europe in the same way as they are in the USA.
Note: Orders containing more than one item will be assigned a distinct processing time for each item.
Prior to shipment, we check the item thoroughly before sending the items. The majority of orders are shipped within 48 hours. The delivery time should be between 3-7 working days.
Returns
The stock is dynamic and we cannot control it completely because of the fact that many parties are involved, which includes our warehouse and factory. The actual stock levels can fluctuate at any moment. It is possible that your order may be out of stock after the order is placed.
Our policy runs for 30 days. If 30 days have passed in the past since you purchased however, we're unable to give an exchange or refund.
To be returned, it must be unopened and in the same condition as when you received it. The item should be in its original packaging.
Related products
